Light-O-Rama Professional Show Controllers
ShowTime Pro LOR1602MP3 with Pro Director
The LOR1602MP3 is a complete musical light show in a box.
Light-O-Rama’s easy to use ShowTime Software Suite lets you create beautiful light shows that can be choreographed to music.
Load a completed show on to an SD memory card and plug the card into the LOR Director built into your ShowTime Pro controller.
The software is not included.
You can purchase a starter package to get the software to setup sequences for this unit.
If you're ready to sequence a show to your own music or soundtrack, checkout our full featured ShowTime Software Suite .
You can network in other Light-O-Rama controllers and orchestrate the activity of thousands of channels.
The only limit is your imagination.
The LOR1602MP3 is built in a weather resistant case allowing it to be used in outdoor displays.
UL508 certified and can handle a maximum of 30 amps by using two independent 15 amp power feeds.
Recommended for standalone and network applications.
Technical Specs:
Outputs: 16
Maximum Amps: 30
Includes High Power Heatsink
10.5 "w x 11.5"h x 5"d
Use 120VAC and 240VAC locations
ULETL
View User Guide :Data Sheet
WARRANTY
Two year limited warranty against defects in materials or workmanship.
Note: To use this controller you must also purchase Light-O-Rama Sequencing Software , RS-485 Adapter , and CAT5 Cable .
How to build a musical sequence PART 1
How to build a musical sequence PART 2
How to build a musical sequence PART 3
How to build a Musical sequence PART 4
What's the difference? We get this question a lot!
shown with covers removed
ShowTime
Pro Series
ShowTime
PC series
Commercial grade steel enclosure available with a UL508 industrial rating
no
PVC (plastic) enclosure available
no
Warranty (in years)
2
1
Operate stand-alone if required
no
Can run commands from ShowTime Director or computer(via one of our converters ) when connected to Light-O-Rama data network.
Amperage rating design (in amperes)
40 but down rated to 30 for safety
30
Unit ID address setting of each controller
dedicated switches on controller
requires a computer
to set
Dedicated On/Off switch inside enclosure
no
Easy access fuses inside enclosure
on circuit board
All standard Light-O-Rama lighting effects
Can operate with any other Light-O-Rama controller on same Light-O-Rama data network
Preferred by professionals
sometimes
Preferred by lighting enthusiasts
sometimes
Dimensions (without electrical pigtails)
10.5"w 11.5"h x 5"d
9.5"w
12"h x 3.5"d
Weight (approximate)
13 pounds
6 pounds
Will it hurt if you drop the enclosure on your foot?
sometimes
Light-O-Rama Controllers - ShowTime Pro LOR1602MP3 with Pro Director - LOR1602MP3