Light-O-Rama Controllers - ShowTime PC CTB16PC Fully Assembled Package - Ready to Go

The CTB16PC is a 16 channel weather resistant light controller that can be part of a multi-controller network.
Each of the 16 independent channels has a number of special effects such as dimming, ramping, twinkle and shimmer.
The CTB16PC is built in a weather resistant PVC case allowing it to be used for your outdoor displays.

No soldering is required.
No assembly required.

You get a fully assembled and tested 30 amp computerized Light Controller housed in a weather resistant plastic enclosure.

Compared with the ShowTime products, this is a lighter duty controller with less bells and whistles but it has the same lighting effects as the ShowTime units.

This unit does not have the Unit ID switches found on the deluxe units so you must connect this it to your PC or Laptop to set the Unit ID.
Once the Unit ID is set, this controller is ready to go.

This controller is ready to plug in.
Note: This controller cannot run standalone it must be connected to a PC or a LOR Director Unit.

Comes as pictured above.
Note: To use this controller you must also purchase Light-O-Rama Sequencing Software, RS-485 Adapter, and CAT5 Cable.

Technical Specs:
Outputs: 16
Maximum Amps: 30
Includes High Power Heatsink
9.5"w x 12"h x 3.5"d

WARRANTY

• One year limited warranty against defects in materials or workmanship.

What's the difference? We get this question a lot!	shown with covers removed
	ShowTime Pro Series	ShowTime PC series
Commercial grade steel enclosure available with a UL508 industrial rating		no
PVC (plastic) enclosure available	no
Warranty (in years)	2	1
Operate stand-alone if required		no
Can run commands from ShowTime Director or computer(via one of our converters) when connected to Light-O-Rama data network.
Amperage rating design (in amperes)	40 but down rated to 30 for safety	30
Unit ID address setting of each controller	dedicated switches on controller	requires a computer to set
Dedicated On/Off switch inside enclosure		no
Easy access fuses inside enclosure		on circuit board
All standard Light-O-Rama lighting effects
Can operate with any other Light-O-Rama controller on same Light-O-Rama data network
Preferred by professionals		sometimes
Preferred by lighting enthusiasts	sometimes
Dimensions (without electrical pigtails)	10.5"w 11.5"h x 5"d	9.5"w 12"h x 3.5"d
Weight (approximate)	13 pounds	6 pounds
Will it hurt if you drop the enclosure on your foot?		sometimes

You might also consider adding:
Stand Alone Show Director	DMX Interface	Digital I/O, Servos	Protocol Converters	Wireless Data	More Accessories

Light-O-Rama Controller - ShowTime Card Fully Assembled (Ready To Go) PC-CTB16PC-RTG