Light-O-Rama Controllers - ShowTime CTB16PC controller board

The CTB16PC controller board has 16 independent channels that can be part of a multi-controller network.
Each of the 16 independent channels has a number of special effects such as dimming, ramping, twinkle and shimmer.

You must mount this board in an appropriate environment, connect primary power and add female plugs to attach to your existing environment.
Perfect for custom installations. 

This unit does not have the Unit ID switches found on the deluxe units.
You must connect this it to your PC or Laptop to set the unique Unit ID.
Once the Unit ID is set, this controller is ready to go.
Note: This controller cannot run standalone.

No soldering is required.
Minimal assembly required.

You get a partially assembled and tested 30 amp computerized Light Controller
You supply additional parts such as power cords and enclosure.
Select any of the options that you need to complete the controller.

Remember you need the High Power Heatsink if you order the Enclosure.
(optional heatsinks shown in picture)

We recommend High Power Heatsinks for long controller life.
You can order low power heatsinks installed for no additional charge.
Just select Low Power HS under the Heatsink selection box.

Heatsinks are installed for FREE!
When you order the optional heatsinks, your card is delivered with the heatsinks installed!

Light-O-Rama Controller - ShowTime Card CTB16PC controller board