Trigger Accessories - Trigger Timer Card for Retro-flective Beam Break

Trigger Timer Card

For use with the Minions Web wired and wireless retro-reflective beam break triggers

Upgrade your standard or wireless Retro-Reflectve Beam Break Trigger with the programmable timing logic, allowing you to operate the output any way you want.

This is a great tool to make your prop trigger on demand and prevent it from running repeatedly, or to make it run for a certain period of time.

Using this with our beam break triggers, gives you excellent scene control.
Yes, our beam break trigger will cn be used with most scene controllers, prop controls, animatronic devices that accept trigger input or anything else that reacts from a smple contact closure.

Available timing logic funtions:
ON delay
OFF delay
ON/OFF delay
Retriggerable one-shot
Non-retrigerable one-shot
Delayed one-shot
On delayed one-shot
Repeat cycle timer
Limit timer
Rate sensor
Flip-Flop

All timing funtions can be operated in one of 3 selectable timing ranges:
0.01 to 0.15 seconds
0.1 to 1.5 seconds
1 to 15 seconds

Delay and hold time ranges may be individually selected, and times precisely set, using 15-turn adjustment potentiometers.
Delay or hold time may also be disabled (zero seconds).
Module allows sensor output to be set for normally-open or normally-closed operation
Valuable for critical evaluation of alternative sensing schemes, and for close monitoring of sensing performance over time (e. g., dirt build-up on lenses or progressive misalignment)

Operating Temperature -40° to +70°C (-40° to +158°F)

Two 15-turn clutched potentiometers with brass elements, accessible from Timing Adjustments outside at the top of sensor, beneath an o-ring sealed polycarbonate cover.
Plus or minus 2% of the timing range (maximum); assumes conditions of Timing Repeatability constant temperature and power supply.
Useful time range is from maximum time down to 5% of maximum.
When the Useful Time Range timing potentiometer is set fully counterclockwise, time will be approximately 5% of maximum.
When the delay time is switched OFF, the card adds no measurable sensing Response Time response time.

trigger, beam break trigger, IR trigger, reflective beam break, trigger timer, prop trigger, electrical, Halloween animatronics, haunted haunted house prop, Haunted house decorations, PIR Prop Trigger, controllers, scene controllers, holiday, lighting, christmas light plugs, halloween decorations, haunt, Haunted house props, Halloween animatronics, haunted house prop, Haunted house decorations, haunted, halloween, effect, effects , Hallowe'en, haunted house, spooky, special effects, efx, fx, special, arenas, concerts, dj, dj's, plays, theaters, rocky horror, graveyard, visual effects, samhain, dia de los meurtos, day of the dead, haunt, amusement park, dark ride, festival, school presentations, sporting events, pep rallies, dance & music recitals, theatrical productions, night clubs, concert halls