MonsterEyes Light Controllers - Lights Alive MonsterEyes 4-foot Four Channel Wiring Harness

MonsterEyes is a light controller with personality.
It gives the effect of up to sixteen pairs of eyes in the dark, or in a prop, or wherever you want to place them.
Green or blue (your preference) eyes calmly blink at random.
But when 'startled' (external trigger input can be an IR sensor, floor mat, hand or foot switch, etc.,) all eyes suddenly snap to an angry bright red.
Then, they gradually blink and fade until all lights are out, then gradually come back individually in the original color and behavior.

Removable wiring harnesses (four wire pairs per harness) are available.
Lights Alive dual color LED 'eye boards' are available, or discrete LED's can be incorporated into a prop run by MonsterEyes.
LED boards are connected via plug, so boards can be disconnected from the harness to pass wires through a hole and eyes used on the other side.

Specifications:

• Four ports, each with 4 channels (16 channel total)
  
• 10-14vdc, 250mA
  
• Short-circuit protection
  
• Triggerable (switch closure)
  
• Compatible with Lights Alive dual color eyes or discrete LEDs. No limiting resistors required.
  
• Random actions (pop on, blink, fade, etc.)
  
• Daisy-chain... multiple controllers can be daisy-chained via the LADC port so all eyes react to the startle mode.
• Controller dimensions: 4.55 x 3.30 x 1.25 inches. 5.5 inches wide with mounting flanges.
• Commercial-quality product. No exposed circuit boards, fire-resistant ABS box, industrial-style connectors.

WARRANTY

• Five year limited warranty against defects in materials or workmanship.

MonsterEyes Light Controllers - Lights Alive MonsterEyes 4-foot Four Channel Wiring Harness LA-MEWH4